dc-8.0 ghz ingap hbt mmic matched gain block amplifier page 1 of 7 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd features chip layout 18.5 db gain @ 6 ghz 24.5 db gain @ 850 mhz 36.0 dbm output ip3 @ 850 mhz 3.5 db noise figure @ 850 mhz 20.3 dbm p1db @ 850 mhz low performance variation over temperature 100% dc on-wafer testing esd protection on all die: >1000v hbm low thermal resistance: <80oc/watt pa driver amp, if amp, lo buffer amp cellular, pcs, gsm, umts wireless data and satcom wlan 802.11a/b/g and wimax transmit and receive functions catv applications typical performance notes: 1. performance in mimix eval board, vs = 8 v, id = 80 ma typ., rbias = 39 , zs = zl = 50 , oip3 tone spacing = 1 mhz, pout per tone = 6 dbm. 2. values reflect performance in recommended application circuit. 3. only on-wafer dc test is done. devices are not tested for rf performance. 850 mhz 1950 mhz 2400 mhz 3500 mhz 6000 mhz units max. typ. min. max. typ. min. max. typ. min. max. typ. min. temperature (oc) parameter small signal gain output p1db output ip3 noise figure operating current input return loss output return loss pout @ -45 dbc, acp is-95, 9 forward channels +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 23.5 23.2 19.3 19.0 34.5 34.0 76 72 9 8 9 8 24.5 24.5 20.3 20.3 36.0 36.0 3.5 3.5 80 80 12 12 13 13 13.5 13.5 25.5 25.8 4.3 4.7 85 89 22.0 21.7 18.0 17.7 30.0 29.0 76 72 13 12 12 11 23.0 23.0 19.0 19.0 31.5 31.5 3.5 3.5 80 80 19 19 17 17 13.5 13.5 24.0 24.3 4.3 4.7 85 89 21.5 21.2 17.1 16.8 28.5 27.5 76 72 12 11 11 10 22.5 22.5 18.1 18.1 30.0 30.0 3.6 3.6 80 80 18 18 16 16 23.5 23.8 4.6 5.0 85 89 21.5 21.5 16.0 16.0 27.0 27.0 3.8 3.8 80 80 14 14 17 17 db db dbm dbm dbm dbm db db ma ma db db db db dbm dbm max. typ. min. 18.5 18.5 10.0 10.0 19.0 19.0 4.5 4.5 80 80 9 9 18 18 max device voltage max device current max device dissipated power rf input power storage temperature junction temperature operating temperature thermal resistance esd (hbm) +6.0 v 130 ma 0.65 w +17 dbm -55oc to 150oc 150oc -40oc to +85oc 80o c/w 1000 v absolute maximum ratings description the cgb7014-bd is a darlington configured, high dynamic range, utility gain block amplifier. designed for applications operating within the dc to 8.0 ghz frequency range, mimix?s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and if applications. these mmic amplifiers are available in bare die form. mimix's ingap hbt technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. the ingap hbt die have extra pads to enable thorough dc testing. this unique test capability and the inclusion of esd protection on all die, significantly enhances the quality, reliability and ruggedness of these products. with a single bypass capacitor, optional rf choke and two dc blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. operation of this device above any of these parameters may cause permanent damage. june 2007 - rev 15-jun-07
page 2 of 7 typical s-parameter and noise performance noise figure vs frequency 2 2.5 3 3.5 4 4.5 5 5.5 0123456 frequency (ghz) noise figure (db) 25 c -40 c 85 c |s21| vs frequency 12 14 16 18 20 22 24 26 012345678 frequency (ghz) |s21| (db) 25 c -40 c 85 c |s11| vs frequency -20 -16 -12 -8 -4 012345678 frequency (ghz) |s11| (db) 25 c -40 c 85 c |s12| vs frequency -30 -28 -26 -24 -22 -20 012345678 frequency (ghz) |s12| (db) 25 c -40 c 85 c |s22| vs frequency -20 -16 -12 -8 -4 012345678 frequency (ghz) |s22| (db) 25 c -40 c 85 c dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd june 2007 - rev 15-jun-07
page 3 of 7 typical power and linearity performance acp @ 850 mhz vs pout 9 channels forward, 750 khz offset 30 khz bw -60 -55 -50 -45 -40 -35 -30 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c linearity performance - base station acp ? is-95 alt1 ch. pwr @ 850 mhz vs pout 9 channels forward, 1.98 mhz offset 30 khz bw -85 -75 -65 -55 -45 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c p1db vs frequency 4 6 8 10 12 14 16 18 20 22 012345678 frequency (ghz) p1db (dbm) 25 c -40 c 85 c oip3 vs frequency 14 18 22 26 30 34 38 012345678 frequency (ghz) oip3 (dbm) 25 c -40 c 85 c 1 mhz separation, 6 dbm/tone acp @ 1950 mhz vs. pout 9 forward channels, 885 khz offset 30 khz bw -70 -60 -50 -40 -30 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c alt1 ch. pwr @ 1950 mhz vs pout 9 channels forward, 1.25 mhz offset 12.5 khz bw -80 -70 -60 -50 -40 4 8 12 16 20 pout (dbm) acp (dbc) 25 c -40 c 85 c dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd june 2007 - rev 15-jun-07
page 4 of 7 typical scattering parameters (vd = +4.75v, icc = 77 ma, t = 23c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 100 0.26 179 17.9 175 0.05 -1 0.06 -174 200 0.26 178 17.9 169 0.05 -3 0.06 -164 300 0.25 176 17.8 164 0.05 -4 0.06 -159 400 0.26 174 17.8 159 0.05 -5 0.07 -158 500 0.25 174 17.6 154 0.05 -7 0.08 -154 600 0.25 170 17.5 148 0.05 -8 0.08 -154 700 0.25 169 17.4 143 0.05 -9 0.09 -155 800 0.24 167 17.2 138 0.05 -11 0.09 -152 900 0.24 166 17.1 133 0.05 -12 0.10 -154 1000 0.24 167 16.9 128 0.05 -14 0.11 -152 1100 0.23 163 16.7 122 0.05 -15 0.11 -155 1200 0.23 162 16.7 117 0.05 -16 0.12 -158 1300 0.22 164 16.3 113 0.06 -18 0.13 -156 1400 0.21 161 16.1 107 0.06 -19 0.13 -157 1500 0.21 162 16.0 103 0.06 -21 0.14 -161 1600 0.21 160 15.7 97 0.06 -22 0.14 -162 1700 0.20 160 15.5 93 0.06 -24 0.15 -163 1800 0.19 160 15.3 88 0.06 -25 0.15 -164 1900 0.19 160 15.1 83 0.06 -27 0.16 -167 2000 0.19 162 14.8 78 0.06 -29 0.16 -169 2100 0.18 161 14.6 73 0.06 -30 0.16 -170 2200 0.17 161 14.4 68 0.06 -32 0.16 -172 2300 0.18 163 14.1 64 0.06 -34 0.17 -174 2400 0.17 167 13.8 60 0.06 -35 0.18 -175 2500 0.17 165 13.6 55 0.06 -37 0.17 -176 2600 0.18 166 13.4 51 0.06 -39 0.18 -179 2700 0.18 169 13.1 47 0.06 -41 0.19 -180 2800 0.17 167 13.0 42 0.06 -42 0.18 179 2900 0.18 167 12.9 38 0.06 -44 0.19 176 3000 0.18 167 12.7 33 0.06 -46 0.19 174 3100 0.19 169 12.5 29 0.07 -48 0.20 173 3200 0.18 168 12.3 25 0.07 -50 0.20 172 3300 0.19 165 12.2 21 0.07 -52 0.20 169 3400 0.19 167 12.0 16 0.07 -54 0.21 166 3500 0.19 165 11.9 11 0.07 -56 0.21 166 3600 0.20 164 11.7 8 0.07 -58 0.21 163 3700 0.20 165 11.5 3 0.07 -60 0.22 161 3800 0.20 163 11.4 -1 0.07 -62 0.23 158 3900 0.21 161 11.2 -5 0.07 -64 0.23 155 4000 0.21 159 11.1 -10 0.07 -66 0.23 153 4100 0.22 159 10.9 -14 0.07 -69 0.23 149 4200 0.21 155 10.8 -18 0.08 -71 0.24 148 4300 0.21 151 10.7 -22 0.08 -73 0.24 144 4400 0.22 150 10.6 -26 0.08 -75 0.24 140 4500 0.22 147 10.5 -31 0.08 -78 0.25 137 4600 0.22 143 10.4 -35 0.08 -80 0.24 134 4700 0.22 140 10.2 -39 0.08 -82 0.25 130 4800 0.22 137 10.1 -44 0.08 -85 0.26 127 4900 0.21 132 10.1 -48 0.08 -87 0.26 123 5000 0.21 127 10 -52 0.08 -89 0.25 118 continues next page. s-parameter data files are available online at: www.mimixbroadband.com dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd june 2007 - rev 15-jun-07
page 5 of 7 typical scattering parameters (vd = +4.75v, icc = 77 ma, t = 23c, device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 5100 0.21 125 9.8 -57 0.08 -92 0.25 114 5200 0.20 121 9.7 -61 0.09 -95 0.26 111 5300 0.20 115 9.6 -65 0.09 -98 0.27 107 5400 0.20 109 9.6 -70 0.09 -100 0.27 102 5500 0.20 104 9.5 -74 0.09 -103 0.27 96 5600 0.19 97 9.4 -79 0.09 -106 0.27 92 5700 0.20 89 9.3 -83 0.09 -109 0.27 87 5800 0.20 83 9.2 -88 0.09 -113 0.28 80 5900 0.19 73 9.2 -92 0.09 -116 0.29 75 6000 0.20 64 9.1 -97 0.09 -119 0.29 68 6100 0.20 55 9.0 -102 0.10 -122 0.29 62 6200 0.20 46 9.0 -107 0.10 -125 0.30 55 6300 0.20 35 8.9 -112 0.10 -129 0.30 49 6400 0.22 24 8.8 -117 0.10 -132 0.30 42 6500 0.23 18 8.7 -122 0.10 -136 0.31 34 6600 0.24 6 8.6 -127 0.10 -140 0.32 27 6700 0.26 -2 8.5 -132 0.10 -143 0.32 20 6800 0.27 -10 8.3 -137 0.10 -147 0.33 13 6900 0.29 -18 8.2 -143 0.10 -151 0.34 6 7000 0.31 -26 8.0 -148 0.10 -155 0.35 -2 7100 0.34 -34 7.9 -153 0.10 -159 0.36 -9 7200 0.37 -40 7.7 -159 0.10 -163 0.37 -17 7300 0.39 -49 7.5 -164 0.10 -167 0.38 -24 7400 0.42 -55 7.3 -169 0.10 -171 0.39 -31 7500 0.44 -61 7.1 -175 0.10 -175 0.40 -39 7600 0.46 -68 6.9 180 0.10 -179 0.41 -45 7700 0.49 -73 6.7 174 0.10 177 0.42 -52 7800 0.51 -79 6.5 169 0.09 174 0.43 -59 7900 0.53 -84 6.2 164 0.09 170 0.44 -65 8000 0.55 -90 6.0 159 0.09 166 0.45 -71 8100 0.57 -95 5.7 154 0.09 162 0.46 -77 8200 0.60 -99 5.5 149 0.09 159 0.47 -83 8300 0.61 -105 5.3 144 0.08 155 0.48 -89 8400 0.63 -110 5.1 139 0.08 151 0.48 -94 8500 0.64 -114 4.8 134 0.08 148 0.49 -99 8600 0.65 -118 4.6 130 0.08 145 0.50 -104 8700 0.67 -123 4.4 125 0.08 141 0.51 -109 8800 0.68 -127 4.2 121 0.07 138 0.51 -114 8900 0.69 -131 4.0 116 0.07 135 0.51 -118 9000 0.69 -135 3.8 112 0.07 133 0.52 -123 9100 0.70 -139 3.6 108 0.07 130 0.52 -127 9200 0.71 -142 3.5 104 0.07 127 0.52 -131 9300 0.71 -146 3.3 100 0.07 124 0.53 -135 9400 0.72 -150 3.1 95 0.06 121 0.53 -139 9500 0.72 -153 3.0 92 0.06 118 0.53 -142 9600 0.72 -156 2.8 88 0.06 116 0.53 -146 9700 0.72 -160 2.7 84 0.06 113 0.53 -149 9800 0.73 -163 2.6 81 0.06 111 0.54 -152 9900 0.73 -166 2.5 77 0.06 109 0.54 -155 10000 0.73 -169 2.4 73 0.05 107 0.54 -159 s-parameter data files are available online at: www.mimixbroadband.com dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd june 2007 - rev 15-jun-07
page 6 of 7 application circuit 2 rf in vs rf out c1 c2 note: this schematic represents the topology of the application circuit recommended by mimix. uuuu l1 r bias = (vs - vd) / id 4 3 1 vd r1 c3 recommended bias resistor values for id = 80 ma supply voltage (vs) 7v 8v 10v 12v rbias (1/4w) 25 39 64 ?? rbias (1/2w) ? ? note: rbias provides dc bias stability over temperature. 89 ref designator value c1, c2 1000 pf c3 1.0 f l1 56 nh d i / ) d v - s v ( = s a i b r 1 r dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd physical dimensions - bd (bare die) bonding configuration june 2007 - rev 15-jun-07
page 7 of 7 dc-8.0 ghz ingap hbt mmic matched gain block amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cgb7014-bd handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas , powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any compone nt of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. esd - gallium arsenide (gaas) devices are susceptible to electrostatic and mechanical damage. die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-static workstation. devices need careful handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers. die attachment - gaas products from mimix broadband are 0.100 mm (0.004") thick with backside metallization. microstrip substrates should be brought as close to the die as possible. the mounting surface should be clean and flat. if using conductiv e epoxy, recommended epoxies are tanaka ts3332ld, die mat dm6030hk or dm6030hk-pt cured in a nitrogen atmosphere per manufacturer's cure schedule. apply epoxy sparingly to avoid getting any on to the top surface of the die. an epoxy fillet should be visible around the total die periphery. for additional information please see the mimix "epoxy specifications for bar e die" application note. wire bonding - windows in the surface passivation above the bond pads are provided to allow wire bonding to the die's gold bond pads. the recommended wire bonding procedure uses gold 0.025 mm (0.001") diameter ball bonds. aluminum wire should be avoided. thermo-compression bonding is recommended though thermosonic bonding may be used providing the ultrasonic content of the bond is minimized. bond force, time and ultrasonics are all critical parameters. bonds should be made from the bond pads on the die to the package or substrate. all bonds should be as short as possible. part number for ordering description cgb7014-bd-000v rohs compliant die packed in vacuum release gel paks june 2007 - rev 15-jun-07
|
